Great reasons to buy from us:
-
Quality
Quality Guranteed -
Free shipping
Fast Shipping -
Fast Shipping
Great Value -
Free shipping
Secure Online Ordering
- Voltage: 115V AC
- Phase: Single
- Horsepower: 1/8 hp
- Inlet/Outlet Size: 2 in
- Compatible Discharge Pipe Size: 2 in
- Compatible Intake Pipe Size: 2 in
Specifications
| Part Number | 0012-F4-1 |
| Brand | Taco |
| Voltage | 115V AC |
| Phase | Single |
| Horsepower | 1/8 hp |
| Series | 0012 |
| Inlet/Outlet Size | 2 in |
| Face to Face Dimension | 8 1/2 in |
| Overall Height | 8.5 in |
| Overall Width | 5.5 in |
| Overall Length | 8.63 in |
| Compatible Discharge Pipe Size | 2 in |
| Compatible Intake Pipe Size | 2 in |
| Manufacturer Warranty Length | 3 yr |
| For Discharge Pipe Diameter | 2 in |
| For Inlet Pipe Diameter | 2 in |
| Item | Hydronic Circulating Pump |
| Pump Type | Standard |
| Number of Speeds | 1 |
| Max. GPM @ Head | 50 gpm @ 1 ft |
| Maximum Feet of Head | 15 ft |
| Min. GPM @ Head | 25 gpm @ 10 ft |
| Connection Type | Flange |
| Shaft Material | Ceramic |
| Loop Configuration | Closed |
| Best Efficiency GPM @ Head | 24 gpm @ 10 ft |
| Drive Type | Direct |
| Standards | NSF, UL-CUS |
| Includes | 2 in Flange Gaskets, Impedance Thermal Protection |
| Mechanical Seal | No |
| Amps | 1.33 A |
| Shut-Off | 14 ft |
| Impeller Material | Polypropylene |
| Thermal Protection | Impedance |
| Pump Mount | In Line |
| Nameplate Voltage | 115V AC |
| Maximum RPM | 3,250 RPM |
| Series Family | 00 |
| Frequency | 60 Hz |
| Maximum Media Temperature | 230 Degrees F |
| Rotor Type | Wet |
| Maximum Flow Rate @ 15 Feet of Head | 0 gpm |
| Body Gasket Material | EPDM |
| Maximum Flow Rate @ 50 Feet of Head | [DELETE] |
| Flange or Union Included | Yes |
| For Use With Potable Systems | Yes |
| Pump Housing Material | Cast Iron |
| Minimum Media Temperature | 40 Degrees F |
| Maximum Flow Rate @ 5 Feet of Head | 45 gpm |
| Maximum Operating Pressure | 150 psi |
| Maximum Flow Rate @ 1 Feet of Head | 50 gpm |
| Maximum Flow Rate @ 10 Feet of Head | 25 gpm |
| Revolutions Per Minute - Maximum | 3,250 RPM |
| Operating Pressure - Maximum | 150 psi |
| Feet of Head - Maximum | 15 ft |
| Includes Flange | Flange Included |
| Includes Volute | Volute Included |
| Full Load Current | 1.33 A |
| Motor Enclosure Design | Totally Enclosed Non-Ventilated |
| Flow Rate - Maximum | 52 gpm |
| Pump Casing Material | Cast Iron |
| Media Temperature - Minimum | 40 Degrees F |
| For Low Lead Compliance Level | EX |
| Media Temperature - Maximum | 230 Degrees F |
| Connection Standard | Flange |
Description
The Taco 0012-F4-1 is a 1/8 hp hydronic circulating pump in the 0012 series. This standard pump circulates water in a hydronic system, operating on 115V AC single-phase power with 2-inch flanged connections for both intake and discharge.
| Shipping | This item ships to USA |
Processing Time:
All orders at Pro Replacement Parts are processed and shipped within 1-2 business days. For orders placed before 12 PM EST, we offer same-day shipping whenever possible. We aim to ensure that your order reaches you as quickly as possible.
Delivery Timeframe:
Our standard delivery window is between 3-8 business days, depending on your location. We partner with trusted carriers such as FedEx, UPS, USPS, and other local carriers to ensure your items arrive safely and on time.
Shipping Methods:
- Items exceeding 50” in width or 70 lbs in weight are shipped via Freight Carrier. You will be contacted by the carrier to schedule a delivery time.
- Items under 50” in width and 70 lbs in weight will be shipped via UPS or FedEx as a small package service.
Freight Shipments:
Freight shipments are delivered curbside in residential areas. You may need assistance to move the package indoors, or you can unbox the shipment and carry each piece inside individually. While some drivers may help move a shipment into a garage or carport, this is not guaranteed. For Inside Delivery requests, please contact us at the time of your order (additional fees apply). Email: support@proreplacementparts.com
Inspection and Damage:
Upon delivery, please inspect the carton and contents for any damage. If you find any damage, document it on the driver's delivery receipt and contact us immediately at support@proreplacementparts.com no later than 24 hours from the delivery time. We cannot accept responsibility for damage that is not noted on the driver's delivery receipt at the time of delivery.
Order Cancellations:
All order cancellations must be requested within 24 hours of placing the order. After this period, our standard return policy will take effect.
Thank you for choosing Pro Replacement Parts. We are dedicated to providing you with the best service and ensuring your orders are delivered in a timely and efficient manner. If you have any questions or need further assistance, please don't hesitate to contact us.
Wide Selection of Brands: At our store, you'll find an extensive range of electric motors from top brands in the industry. We carefully select our inventory to ensure that you have access to the best and most reliable products on the market. Whether you need a motor for an industrial machine, a household appliance, or a specialized project, we have something for everyone.
Customer-Centric Service: We believe in putting our customers first. Our team is committed to providing you with personalized service and support throughout your buying journey. From helping you choose the right motor for your needs to answering any queries you have after purchase, we're here to assist you every step of the way.
Competitive Pricing: We strive to offer our high-quality electric motors at competitive prices. Our goal is to provide you with the best value, ensuring that you get a top-performing motor without breaking the bank. Plus, our regular deals and promotions mean that you can save even more when you shop with us.
Reliable Shipping and Handling: While we don't offer same-day shipping, we understand the importance of timely delivery. That's why we work with reliable shipping partners to ensure that your order is processed, shipped, and delivered efficiently. You can trust us to get your electric motor to you in excellent condition and within a reasonable timeframe.
Knowledgeable Support: Our team is knowledgeable about the wide range of electric motors we offer. We can provide you with detailed information and specifications for each product, helping you make an informed decision. If you have any questions or need advice, our experts are just a call or email away.
Your purchase is covered by the Manufacturer’s Limited Warranty.
For return/refund information, please visit our Returns & Refunds page.
Description
- Voltage: 115V AC
- Phase: Single
- Horsepower: 1/8 hp
- Inlet/Outlet Size: 2 in
- Compatible Discharge Pipe Size: 2 in
- Compatible Intake Pipe Size: 2 in
Specifications
| Part Number | 0012-F4-1 |
| Brand | Taco |
| Voltage | 115V AC |
| Phase | Single |
| Horsepower | 1/8 hp |
| Series | 0012 |
| Inlet/Outlet Size | 2 in |
| Face to Face Dimension | 8 1/2 in |
| Overall Height | 8.5 in |
| Overall Width | 5.5 in |
| Overall Length | 8.63 in |
| Compatible Discharge Pipe Size | 2 in |
| Compatible Intake Pipe Size | 2 in |
| Manufacturer Warranty Length | 3 yr |
| For Discharge Pipe Diameter | 2 in |
| For Inlet Pipe Diameter | 2 in |
| Item | Hydronic Circulating Pump |
| Pump Type | Standard |
| Number of Speeds | 1 |
| Max. GPM @ Head | 50 gpm @ 1 ft |
| Maximum Feet of Head | 15 ft |
| Min. GPM @ Head | 25 gpm @ 10 ft |
| Connection Type | Flange |
| Shaft Material | Ceramic |
| Loop Configuration | Closed |
| Best Efficiency GPM @ Head | 24 gpm @ 10 ft |
| Drive Type | Direct |
| Standards | NSF, UL-CUS |
| Includes | 2 in Flange Gaskets, Impedance Thermal Protection |
| Mechanical Seal | No |
| Amps | 1.33 A |
| Shut-Off | 14 ft |
| Impeller Material | Polypropylene |
| Thermal Protection | Impedance |
| Pump Mount | In Line |
| Nameplate Voltage | 115V AC |
| Maximum RPM | 3,250 RPM |
| Series Family | 00 |
| Frequency | 60 Hz |
| Maximum Media Temperature | 230 Degrees F |
| Rotor Type | Wet |
| Maximum Flow Rate @ 15 Feet of Head | 0 gpm |
| Body Gasket Material | EPDM |
| Maximum Flow Rate @ 50 Feet of Head | [DELETE] |
| Flange or Union Included | Yes |
| For Use With Potable Systems | Yes |
| Pump Housing Material | Cast Iron |
| Minimum Media Temperature | 40 Degrees F |
| Maximum Flow Rate @ 5 Feet of Head | 45 gpm |
| Maximum Operating Pressure | 150 psi |
| Maximum Flow Rate @ 1 Feet of Head | 50 gpm |
| Maximum Flow Rate @ 10 Feet of Head | 25 gpm |
| Revolutions Per Minute - Maximum | 3,250 RPM |
| Operating Pressure - Maximum | 150 psi |
| Feet of Head - Maximum | 15 ft |
| Includes Flange | Flange Included |
| Includes Volute | Volute Included |
| Full Load Current | 1.33 A |
| Motor Enclosure Design | Totally Enclosed Non-Ventilated |
| Flow Rate - Maximum | 52 gpm |
| Pump Casing Material | Cast Iron |
| Media Temperature - Minimum | 40 Degrees F |
| For Low Lead Compliance Level | EX |
| Media Temperature - Maximum | 230 Degrees F |
| Connection Standard | Flange |
Description
The Taco 0012-F4-1 is a 1/8 hp hydronic circulating pump in the 0012 series. This standard pump circulates water in a hydronic system, operating on 115V AC single-phase power with 2-inch flanged connections for both intake and discharge.
Shipping
| Shipping | This item ships to USA |
Processing Time:
All orders at Pro Replacement Parts are processed and shipped within 1-2 business days. For orders placed before 12 PM EST, we offer same-day shipping whenever possible. We aim to ensure that your order reaches you as quickly as possible.
Delivery Timeframe:
Our standard delivery window is between 3-8 business days, depending on your location. We partner with trusted carriers such as FedEx, UPS, USPS, and other local carriers to ensure your items arrive safely and on time.
Shipping Methods:
- Items exceeding 50” in width or 70 lbs in weight are shipped via Freight Carrier. You will be contacted by the carrier to schedule a delivery time.
- Items under 50” in width and 70 lbs in weight will be shipped via UPS or FedEx as a small package service.
Freight Shipments:
Freight shipments are delivered curbside in residential areas. You may need assistance to move the package indoors, or you can unbox the shipment and carry each piece inside individually. While some drivers may help move a shipment into a garage or carport, this is not guaranteed. For Inside Delivery requests, please contact us at the time of your order (additional fees apply). Email: support@proreplacementparts.com
Inspection and Damage:
Upon delivery, please inspect the carton and contents for any damage. If you find any damage, document it on the driver's delivery receipt and contact us immediately at support@proreplacementparts.com no later than 24 hours from the delivery time. We cannot accept responsibility for damage that is not noted on the driver's delivery receipt at the time of delivery.
Order Cancellations:
All order cancellations must be requested within 24 hours of placing the order. After this period, our standard return policy will take effect.
Thank you for choosing Pro Replacement Parts. We are dedicated to providing you with the best service and ensuring your orders are delivered in a timely and efficient manner. If you have any questions or need further assistance, please don't hesitate to contact us.
Why Buy From Us?
Wide Selection of Brands: At our store, you'll find an extensive range of electric motors from top brands in the industry. We carefully select our inventory to ensure that you have access to the best and most reliable products on the market. Whether you need a motor for an industrial machine, a household appliance, or a specialized project, we have something for everyone.
Customer-Centric Service: We believe in putting our customers first. Our team is committed to providing you with personalized service and support throughout your buying journey. From helping you choose the right motor for your needs to answering any queries you have after purchase, we're here to assist you every step of the way.
Competitive Pricing: We strive to offer our high-quality electric motors at competitive prices. Our goal is to provide you with the best value, ensuring that you get a top-performing motor without breaking the bank. Plus, our regular deals and promotions mean that you can save even more when you shop with us.
Reliable Shipping and Handling: While we don't offer same-day shipping, we understand the importance of timely delivery. That's why we work with reliable shipping partners to ensure that your order is processed, shipped, and delivered efficiently. You can trust us to get your electric motor to you in excellent condition and within a reasonable timeframe.
Knowledgeable Support: Our team is knowledgeable about the wide range of electric motors we offer. We can provide you with detailed information and specifications for each product, helping you make an informed decision. If you have any questions or need advice, our experts are just a call or email away.
Warranty/Returns
Your purchase is covered by the Manufacturer’s Limited Warranty.
For return/refund information, please visit our Returns & Refunds page.
No reviews yet. Be the first to review this product!
